Welcome to visitUHF RFID Reader,UHF RFID Module,UHF RFID Antenna,UHF RFID TagOfficial website!

> R2401QS

Product Name:R2401QS   
Product introduction:2.4GHz+13.56MHz dual-frequency reader, supports reading and writing of 2.4GHz active cards and NFC cards at the same time. The 2.4GHz card reading distance is 20 meters, and the 13.56MHz card reading distance is 3cm.

product details

1. Product Introduction

NRP-R2401QS is a 2.4GHz+13.56MHz dual frequency reader. As a 2.4GHz active reader, it can identify more than 200 active tags at the same time, and the typical reading distance is 20 meters. As a 13.56MHz reader, it can fully support the ISO 14443A protocol, and the reading distance is 3cm. It can be used in personnel management, regional positioning, asset management, security alarm and other fields. Simple and lightweight design, providing serial port, Wiegand and other communication interfaces, external power adapter power supply.


2. Operating mode

The reader continuously receives the radio frequency information, battery voltage status, tag tamper status and temperature value from the tag, and then immediately transfers the received data to the background management system through the communication interface. In special applications, you can also write data to tags or change tag parameters.


3. Recognition distance

In a good visual environment, the distance can reach 0-20 meters. When users have different requirements for the recognition distance, they can choose active electronic tags and readers with different signal strengths, and can adjust the power and receiving sensitivity of the readers through software to achieve the required recognition distance.


4. Recognition speed & ability

When the electronic tag is running at a maximum speed of 200Km/h within the effective recognition range of the reader, stable recognition can be ensured. The reader can read more than 200 active electronic tags at the same time; the built-in anti-collision algorithm of the reader can ensure that all identifications are not missed in a very short time.


5. Communication security

The reader and the matching electronic tags use a special communication protocol to verify the legitimacy of the device, and use an encryption algorithm to ensure the security of communication data.


6. reliability

It can work 7*24h with high intensity and stability and low power consumption.


7. Communication Interface

Provide RS232, RS485, Wiegand26/34 and other communication interfaces. Provide VC software interface, can provide the underlying communication protocol.


8. Customizable

The reader can be customized according to the special requirements of customers.


Technical parameter
Working voltageDC 9~12V
Working current800~3000mA
ModulationGFSK
Rate115200bps
InterfaceRS232、RS485、Wiegand
Frequency2.4GHz/13.56MHz
Security mechanismEncryption algorithm
Distance0 ~ 20m/0~3cm
Speed200km/h
Multi-tag read≥200 active tags
Angle360° reading and writing
PolarizationCircular polarization
Antenna gain2dBi
Working powerMilliwatt
CommunicationTime division multiple access / synchronous communication.
Anti-interferenceChannel isolation, multiple devices do not interfere with each other
Power supplyDC 9~12V   200~1000mA
ShellIndustrial-grade design, alloy shell, waterproof, dustproof and anti-collision
Size155mm*115mm*35mm
Weight0.25kg
InstallationHang buckle or other

Other product