Welcome to visitUHF RFID Reader,UHF RFID Module,UHF RFID Antenna,UHF RFID TagOfficial website!

> MTCP01

Product Name:MTCP01   
Product introduction:General TCP/IP module, used for mainboard network communication, stable and high-speed. With driver and supporting software, you can configure IP, server, working mode, automatically obtain IP, and automatically obtain n

product details

Module introduction

MTCP01 network serial port transparent transmission module (NRP-MTCP01), through the network to TTL level serial port, can realize the two-way transparent transmission of network data and serial data, with TCP CLIENT, TCP SERVER, UDP SERVER, UDP CLIENT 4 working modes, serial port baud The highest rate can support up to 921600bps, which can be easily configured through the host computer software, which is convenient and fast.


● Realize two-way transparent transmission of serial data and network data

● Support 10/100M, full-duplex/half-duplex adaptive Ethernet interface, compatible with 802.3 protocol

● Support MDI/MDIX line automatic conversion

● Support 4 working modes: TCP CLEINT/ SERVER and UDP CLEINT/ SERVER

● The serial port baud rate supports 300bps ~ 921600bps

● Support up to two independent serial ports at the same time, independent transparent transmission

● Serial port TTL level, compatible with 3.3V and 5V

● The serial port supports 5, 6, 7 or 8 data bits and 1 or 2 stop bits

● The serial port supports odd, even, no parity, blank 0, mark 1 parity mode

● The serial port supports full-duplex and half-duplex serial communication, and supports automatic switching of RS485 transceiver

● Support DHCP to automatically obtain IP address function

● Support DNS domain name system

● Support 0~2000ms serial port timeout setting ● Network parameters, serial port parameters can be configured through the host computer

● Support KEEPALIVE mechanism

Pin description

RSTIInputExternal reset input, active low
Restore factory settings, chip power-on detection, active low
DIROutputUsed to control the RS485 transceiver switch
RXD1InputSerial data input of asynchronous serial port 1
TXD1OutputSerial data output of asynchronous serial port 1
GNDPowerCommon ground
VINPowerPower input terminal, the default is 5V, TTL version when J1 is shorted, the input is 3.3V

Serial port configuration mode setting pin, built-in pull-up, when low level is detected, 

enter the serial port configuration mode, high level to exit the configuration mode

RXD2InputSerial data input of asynchronous serial port 2
TXD2OutputSerial data output of asynchronous serial port 2
TCPCSOutputIn TCP client mode, connection (channel 1) status indication, low level is active

Other product